Mounting rules

The substrate must be perfectly flat, without cracks, internal cavities or cracks and cleaned carefully; any part that is not securely fastened must be replaced.

Some surfaces (cement, mortar and generally those with water absorption) requires the application of a primer (primer).

Leveling, when necessary, it will be done by applying a wet layer of mortar or self-leveling cement.

The humidity in the substrate must not exceed 2.5 – 3 %.

Before applying the adhesive, check the humidity in the substrate with a hygrometer. The substrate must never contain lime

Adhesives

Adhesives and mechanical fastening systems will be purchased with a certificate of quality and warranty. The application sheets and mixing technology of the adhesive supplier and the mechanical fastening system supplier must be observed..
Adhesive manufacturers support the field of natural rock cladding with products of different colors (white, Gray) using them both indoors and outdoors.